R&S Overhead Doors of NorCal is a family-owned, CSLB-licensed garage door company serving Butte County, CA, and the broader Greater NorCal region. As an established garage door company in Butte County, CA, we provide residential garage door services, commercial overhead door solutions, and gate services for homes and businesses throughout the area.
From a broken extension spring to a commercial rolling door that won’t close or a gate system that’s out of sync, our technicians identify the issue and fix it correctly. We offer same-day scheduling and 24/7 emergency garage door repair to homes and businesses across Chico, Oroville, Paradise, Gridley, Durham, South Oroville, Oroville East, and the surrounding Butte County area.
Garage doors and gate systems are put to work every day, and the hardware inside takes real wear over time. Cable drums wear down, roller bearings flatten, spring coils weaken, and tracks shift out of alignment. For Butte County homeowners and businesses, catching these issues early through professional service prevents a minor problem from becoming a costly failure.
Torsion springs, cable drums, and limit switches require proper tools and professional training to service safely. Attempting these repairs without the right experience risks injury and additional damage. R&S Overhead Doors of NorCal gives Butte County properties the dependable, licensed garage door services they need to stay safe and fully operational.
If you see any of these warning signs, do not wait. Call us now to set up a checkup with a pro.
Butte County homeowners count on R&S Overhead Doors of NorCal for a complete range of residential garage door services built to last.
We start each service call with a complete door inspection, find the underlying cause, and fix it properly using parts built for your system.
Our team handles door selection, spring tensioning, track setup, and opener configuration so your new door performs correctly right away.
We pull out the old door system and install the right replacement for your opening size, curb appeal goals, and day-to-day performance requirements.
We lubricate all moving parts, check spring tension and balance, tighten hardware, and run a full safety inspection to keep your door performing well.
Broken torsion or extension springs are replaced to match your door’s exact size and weight, and a full system test is run before we wrap up.
Damaged panels are replaced individually to restore the look and structural strength of your door without the cost of a full system swap.
We service all major opener types, including belt, chain, and screw drive systems, covering installation, repair, and full replacement as needed.
Frayed, loose, or snapped lift cables are replaced quickly to restore the even door balance and smooth, safe operation your system needs.
Cracked or worn rollers are replaced with the right size and material to quiet the operation and bring back the smooth, consistent movement your door needs.
Bent or damaged track sections are corrected or replaced to bring the door back into proper alignment and protect surrounding hardware from continued wear.
Our tune-up visits cover lubrication, balance checks, tension adjustments, and a full hardware review designed to extend your door’s working life.
Unexpected failures don’t wait for business hours. Our team responds 24/7 to restore safe, reliable access to your Butte County home.
R&S Overhead Doors of NorCal serves Butte County businesses with commercial overhead door solutions designed to minimize downtime and keep facilities running.
Our technicians pinpoint the cause of commercial overhead door failures fast and complete the necessary repairs to get your facility operational again.
We handle full commercial overhead door installations from start to finish, ensuring every system is aligned, balanced, and configured for your facility.
Preventive maintenance keeps springs, hardware, tracks, and operators in check before wear leads to failures that disrupt your Butte County facility.
When a commercial door can no longer perform reliably, we remove it and install a compliant, properly sized replacement built for your facility's demands.
Failed commercial springs are replaced to the specification your door requires, restoring the balance and safety your facility depends on daily.
Commercial sectional doors are installed with proper track alignment, spring tension, and sealing so they perform dependably under heavy daily use.
Rolling steel doors and grilles are installed and maintained to stand up to the high-cycle demands of commercial and industrial facilities in Butte County.
Sheet doors for cold storage, food processing, and industrial use are installed and maintained for the consistent performance your operation requires.
We select and install commercial operators matched to your door's exact weight and cycle demands, then service them to ensure consistent performance.
Hollow metal doors are installed to code for the strength, fire resistance, and long-term security performance your commercial building requires.
We install and maintain dock levelers, vehicle restraints, dock bumpers, seals, and shelters to keep your Butte County loading dock safe and efficient.
Automatic sliding, swinging, and folding systems are installed and maintained to deliver hands-free, high-traffic-ready performance for commercial properties.
We install glass and aluminum storefront systems that balance professional aesthetics with the commercial durability and energy performance your building demands.
From automatic gates to full access control systems, R&S Overhead Doors of NorCal handles gate services for Butte County properties of every type.
We design and install gate systems for residential and commercial properties in Butte County, sized and configured to meet your security and automation needs.
We diagnose gate issues, including hardware damage, operator failure, track misalignment, and control faults, then repair them quickly to restore reliable access.
We service gate rollers, hinges, operators, and control components on a regular schedule to prevent wear-related failures year-round.
Swing, slide, and barrier arm gate systems are installed and calibrated for dependable automatic operation on any Butte County property.
Gate operators are selected for your gate's specific weight, type, and usage load, then installed and maintained to perform consistently over time.
We install and service keypad entry, card readers, intercoms, and vehicle detection systems on DoorKing, LiftMaster, Linear, and CellGate platforms.
From basic repairs to large-scale installations, our garage door repair team brings the same attention to detail to every job, serving Butte County homes and businesses throughout Greater NorCal.
Every Butte County service call follows the same clear, no-guesswork process, so you always know what to expect from start to finish.
A quick phone call or online request is all it takes to get on our schedule. We work around your availability and confirm same-day appointments across Butte County.
Our technician shows up on time, fully ready to work, and performs a complete inspection of your door, gate, or commercial system before proceeding.
We review our findings with you in straightforward terms and present a clear estimate so you can make an informed decision before we start any work.
Our skilled technicians complete every repair or installation with quality parts and careful attention, making sure the work is done right the first time.
Before leaving, we run a complete check of balance, sensors, and hardware, then walk you through the work completed and answer any questions.
R&S Overhead Doors of NorCal is the garage door company in Butte County, CA that homeowners and businesses call when they need professional service done right.
Professional service addresses frayed cables, worn springs, and track issues that put your family, employees, and property at risk every day.
A garage door that has been properly installed and maintained runs quietly, evenly, and without unnecessary strain on the opener or hardware.
Routine inspections and tune-ups catch early-stage wear before it turns into a failure that leaves you locked out or stuck inside.
When your garage door and gate systems close completely and hold proper alignment, your home and business are better protected against unauthorized entry.
Expert installation and ongoing maintenance extend the life of springs, rollers, cables, and openers, lowering long-term ownership costs for your system.
Butte County property owners choose our garage door company because we combine local knowledge, licensed expertise, and straightforward service.
R&S Overhead Doors of NorCal has been family-operated since the start, and that shows in how we approach every Butte County service call we take on.
Our CSLB License #460057 confirms that every repair and installation in Butte County is performed to California's standards for contractor work.
We offer same-day garage door service throughout Butte County and 24/7 emergency response for failures that need immediate professional attention.
All new door, gate, and dock installations include a no-cost estimate upfront so Butte County customers know exactly what the project involves.
Whether your property needs a residential garage door, a commercial overhead system, or a full gate and access control setup, we can handle it.
When you search for a professional garage door company near me in Butte County, CA, R&S Overhead Doors of NorCal is the licensed local team with the experience and availability to help. We serve communities throughout Butte County and the surrounding Greater NorCal region.
Service areas include:
Can’t find your location? Give us a call. We’re happy to confirm service availability for your area.
Ready to set up a service visit or request a free estimate on a new installation? Our team is available for Butte County homeowners and businesses every step of the way.
1100 Garden Hwy Suite 1500, Yuba City, CA 95991
(530) 244-0799
offers@rsdoorsandgates.com
Mon–Fri: 8:00 AM – 4:30 PM | 24/7 Emergency Service Available
We provide residential garage door services, commercial overhead door solutions, gate installation and repair, and access control systems for properties throughout Butte County and Greater NorCal.
Yes. We cover everything from spring repair and roller replacement to new door installation, opener service, and around-the-clock emergency garage door repair for Butte County homeowners.
Yes. We install, repair, and maintain commercial overhead doors, sectional doors, rolling doors, hollow metal doors, and loading dock equipment for Butte County facilities.
Yes. We handle automatic gate systems, gate operators, and access control installation using DoorKing, LiftMaster, Linear, and CellGate platforms for Butte County properties.
Yes. Our team is available around the clock to handle emergency garage door repairs and restore safe access for Butte County homeowners and businesses.
Yes. We offer same-day appointments throughout Butte County and the surrounding NorCal counties. Call us to reach our team today.
Yes. R&S Overhead Doors of NorCal carries CSLB License #460057, which means every repair and installation in Butte County meets California’s contractor licensing standards.
We install and service sectional doors, rolling doors and grilles, sheet doors, hollow metal doors, operators, dock equipment, and glass and aluminum storefront systems.
Service costs vary based on the type of work, parts involved, and your system’s condition. We walk you through a clear, upfront estimate before any work begins.
R&S Overhead Doors of NorCal serves Butte County and the surrounding Greater NorCal region. Call us or submit a service request online to get started.
BOOK OnLINE